I already removed the two bolts on each crank but nothing came out. There is no 2mm bolt anywhere and my dad attempted sledgehammering it out (with a wooden block inbetween obviously) but still nothing. What is the method to try remove this crank? I’ve never done it before and am fairly new to bikes.
by mysteryyfx
10 Comments
[deleted]
[deleted]
Start by cleaning your shit foo.
You need a crank puller with the correct end cap for either powerspline or ISIS (I can’t tell from the photos). Like a park tool CWP-7.
Are you removing them to replace the bottom bracket?
You need a crank pulling tool like the Park CCP-22.
Correction: the ccp-44 is too big for PS spindles, my mistake.
Did you think to google “how to remove ___ cranks” before pounding it with a hammer?
Start by taking the earth of your cranks.
Love that dad just wacked it with a hammer and wood. Even with the internet…
Clean it.
Use a crank puller
Voila
Clean that up before you take anything off. They make pullers if it’s hard, or just work it out.
Allen keys n stuff