Share.

5 Comments

  1. **Thanks for posting to /r/gravelcycling! It looks like you’ve submitted an image.**

    This community encourages additional context about image submissions. You can include details about your post in a comment below. Some suggestions for good comments:

    * Bike details (make, model, accessories, and gear)
    * Location (specific or general is fine)

    You can also use **post flair** to give additional context about your post.

    *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/gravelcycling) if you have any questions or concerns.*

  2. I pulled that Bontrager switch lever permanently off when I purchased my Trek and use a 6mm hex tool instead

  3. Sea-Adeptness-2427 on

    In which direction are you ‘pulling’? This a thru-axle, which is screwed on. Not a quick release lever.

    Righty-tighty, lefty-loose (you need to turn it leftwards/counterclockwise).

    If that isn’t working. try adding a tiny dot of penetrating oil to the other side of the axle, assuming you can see the treads. There may be a plastic cap on the other side which may be easy to remove to access them.

  4. It’s not a quick-release lever where you pivot it back, it rotates like the hand on a clock to remove the axle (counter-clockwise). If it’s like other treks, that lever is just a convenience thing; you can remove it from the thru-axle and just use a 6mm hex wrench if you want. (It takes a little effort because there’s an o-ring to give some friction, but it just pulls straight out from the axle/hub.)

    edit to add: here you go, trek has a video on how it works. [https://youtu.be/uV_bTo0rssU?si=9_qPajuGxZeKt7Xo](https://youtu.be/uV_bTo0rssU?si=9_qPajuGxZeKt7Xo)

  5. Dramatic-Builder-567 on

    Whoa, I presume you haven’t had to deal with a flat yet? I am a bit shocked the person whom you purchased it from didn’t go over this with you.

Leave A Reply