I replaced all my bearings using hardware you can find at a hardware store. Saved $150.

LBS wanted $40 per a pivot. That would have cost $160.

You’ll need screws of different size lengths depending on your pivots. Spacers that have a OD smaller than the bearing, socket wrenches so the bearing can be extracted into and washers.

To install the new bearings, use a washer and the old bearing to push the new one in.

More details here https://youtu.be/H-cxtGdSSnk?si=N5bZpIexHx6KjzS6

by TheBlack_Swordsman