Advice needed please. I noticed some play in my shock so need to replace the bushings. I’ve found 6mm bushings online but the measurements I see don’t seem to fit what I have, even accounting for wear. The steel axel bolt has a diameter of 5.82mm. And the internal circumference of the current bushings doesn’t seem to be that far off 6mm at 6.03mm. Inside bushing diameter measuring in at 12.73mm which equates to close to 40mm circumference. I’m wondering what size replacement bushings are needed, or if the original steel axle bolt was undersized to start with (or the bushings were 5.8mm originally if that measurement is such a thing) and if so what to source for that? It’s an old Specialized Enduro and I replaced the oil less than a year ago so just looking for the cheapest and simplest option to solve the slight play issue. Bolt is 50mm length. .
by big-rabbit-ears