So you’re saying that all spokes on one side suddenly uniformly lost tension? Seems unlikely.
f0_to on
What happens if you flip the wheel?
Either_Basil_6960 on
just tighten the spokes right
Tall-ish on
Before you go tightening spokes, double check that the wheel is fully seated in the drop outs. 9 times out of 10 that’s the source of this issue
Hillariat on
Would check if the wheel is set fully in the dropout and that your QR skewer is sufficiently tight before tightening any spokes. That and id just hand gauge the spoke tension to see if one side is significantly “looser” than the other side
5 Comments
So you’re saying that all spokes on one side suddenly uniformly lost tension? Seems unlikely.
What happens if you flip the wheel?
just tighten the spokes right
Before you go tightening spokes, double check that the wheel is fully seated in the drop outs. 9 times out of 10 that’s the source of this issue
Would check if the wheel is set fully in the dropout and that your QR skewer is sufficiently tight before tightening any spokes. That and id just hand gauge the spoke tension to see if one side is significantly “looser” than the other side