Wanting to get back into cycling, the sprockets spin well and don’t feel like they seize. They just don’t look nice, should I replace with something more modern or get a direct 1:1 replacement?
I'm wanting to use the bike for exercise and possibly a short commute. Any good advice would be appreciated
Just get something that has and is intended for the same speed.
To get speeds or something more modern, you’d need to change the levers too.
oldfrancis on
Free wheels can have rust and still perform just fine. As long as the internals are clean and lubricated, you can use it.
I would replace the chain. A brand new chain will tell you whether or not any of the cogs are worn.
ZippierUser on
This appears to be a 90s mtb. Assuming the rest is fine a new chain and casette should do. But then again, this bike is old and a rebuild is usually recommended
Former_Mud9569 on
just put some lube on the chain and send it for now. If you decide you like cycling you’ll want to look for an upgrade shortly.
4 Comments
Just get something that has and is intended for the same speed.
To get speeds or something more modern, you’d need to change the levers too.
Free wheels can have rust and still perform just fine. As long as the internals are clean and lubricated, you can use it.
I would replace the chain. A brand new chain will tell you whether or not any of the cogs are worn.
This appears to be a 90s mtb. Assuming the rest is fine a new chain and casette should do. But then again, this bike is old and a rebuild is usually recommended
just put some lube on the chain and send it for now. If you decide you like cycling you’ll want to look for an upgrade shortly.