I’m going to show you how to change a bicycle tube step one you’re going to want to go ahead and remove both of these bolts bre that one loose this one all right we remove the chain slide this forward there you go first thing you want to do is take these spoons pop it under the bead here pull it out keep working along the side of the tire till you get multiple areas out there you go now we pop the bead work your hand around the edge boom grab your old tube pull it out grab your new tube you’re going to want to put just a little bit of air in this maybe one to two pounds now you want to find your shraer valve and you want to find the hole it’s going to go through put that in first and then work the tube around boom boom next you want to work this tread on you just want to use a spoon pop that in last step we’re going to air this up slap it back on the bike and we’re good to go
45 Comments
Good work this was the perfect video for what i was after
I use tea spoons 😅
I doubt they used gloves in the 60s 😅
The end😂
Great vid!
This is my bike also
Thank you!
I didnt understand how to replace my tire until the very end.
I thought you were going to do this in 60s 😅
the tube nuzal damage 2 times 😢 whats the reason?
What is the specific name of the spanner you used to remove the bolts start of video
I’m having the hardest time removing the bolt from the tire. I only have a wrench 😫😂 I was able to remove one of them. The other one seems to be stuck. My hands are aching. Lol someone please help!!
How do you attach it back
Thanks for the tips👍🏽
You’re way too big for that bike
Great efficient video! Just what I was looking for 😁
Thank you.
I got a hybrid bike with those thin tires and it was kicking my ass till I watched this video. I didn't have your spoons so I used silverware spoons to do the trick and after I got to tire mostly back on I deflated the little bit of air I added and was able to finally get it all on.
IN PAKISTAN WE USE NIW THIS TRICK
just gonna share the gospel 🙂 John 3:16 for god so loved the world that he gave his one and only begotten son that however believes in him shall not perish but have everlasting life
Rumor has it. The tube only lasted a week 😂
I can't put the whee; back on with the chain thing. Can you please make a more in depth video?
Super
Tip: those spoons are made with a hook on the end to hook under the spoke to keep the tyre levered without holding it
This was really helpful! The "Yeet" was funny too
My tires are bald af but remembered i had another without a tube in it. Thanks
Did you mean psi when you said pound? I was clueless when you said 1-2 pound of air.
If you want to not damage the rims, find the normal way to remove tire without tools, just by hand. Its easier and safer for bike
I got 3 bikes need sorting and another bike on the way! 4,bicyclrs! Uk 🇫🇯🇫🇮
While I'm watching this, I'm working on the same exact bike😂
This guy.
Has no business instructing on how to change An Intertube in anything
Check the inside of the tire for thorns before putting the tube in. ✌️
The other video i watched was 10 minutes. Lots of dos and don'ts which made me dislike tubed tires. Now this shows it's very simple. Confused now. I think I'll try it myself to know reality.
In the 80s we didny have speacial gloves
You can patch most tubes if just a small hole. If know what you doing , it will work. Tubes cost to much to be throwing them away just for a small hole.
If you're going to do this video you need to do it right you didn't check the tire for any foreign objects you're going to get another hole in your tube if there's something in there like a thorn. I had a lot of thorns in my tire I had to pull out with a pair of tweezers and one of the Thorns worked its way into my tube. I patch my tube sure wasn't going buy a new tube for a small hole . I even patch bigger holes and if you do it right . Its will hold up .
I did the steps but when I pumped it up and my son rode his bike after an hour it was flat again. I don't know why it's happened. It's a new inner tube. What am I doing wrong?
L tips😂
Relax and take your time however long it may take ..You are not competing in the Tour de France you know!
Beautifully done and very helpful thanks
What about the breaks?
I can blow your tube if you blow mine..👉👌
Thanks quick and too the point
Okay, this was going well until I went to put the back tire on. It's not going on. It's not lining up. The side with the gears wants to slip right in. The other side is not going back in. I get my bike is beat to hell but it was not this hard to take the tire off.
in reality there are multiple cuts in the video, i wanna see you do it in a single cut. use quick release if you want to.
All of that is a complete waste if you don't check the inside of the tire for glass wire thorns etc before inserting the new inner tube